The shuttle can be adjusted to print 1, 2, 3, or 4 colours and is ideal for printing short run multi colour work as it only requires one fixture, unlike a transfer carre or rotary table.

This was used on a PP 150 Pad Printer (Kent) but should be suitable for use on most of the Kent machines.

The shuttle is in good working order.

Also available is a flaming unit.

Year of Manufacture: 1996 (approx)

This would be an ideal start up machine for anyone looking to go into subcontract printing. It can be used for single or multi colour printing.

This is a four colour machine with a 14 station transfer carre. The machine and transfer carre are mounted on a height adjustable stand.

The machine is in good working order but the ink cup ceramic rings may need replacing and the price reflects this.

The approximate cost to replace the ink cups is £200 - £250 each.

The machine can be seen running.

Also available is a flaming unit and a pneumatic jig shuttle.

Year of Manufacturer: 1996

This Teca-Print TC 500 pad printer with transfer carre, both are mounted on an original Teca-Print VR1 (XYZ) height adjustable table.

The TC 500 printer is an open ink well system and has a 450 x 150 mm plate holder. It will be supplied with a 500 mm flexi blade holder.

The transfer carre has 14 stations with a pitch of 114.3 mm. The size of the platens is 113 x 108 mm. The transfer carre can be operated in automatic cycle or by foot pedal, with a switch for 2, 3, 4 colours.

Both the printer and transfer carre are pneumatically operated and require single phase power.

Ceramic Rings to fit Teca Print Sealed cups

96 mm diameter to fit Teca print sealed cup 89 51 03
86 mm diameter to fit Teca Print sealed cup 89 51 02
72 mm diameter to fit Teca Print sealed cup 89 51 01
56 mm diameter to fit Teca Print sealed cup 89 51 00

Brand new and boxed.

Price is for a single Ring.

The machine is mounted on a height adjustable Teca Print stand and although not shown in the photo it does have the Teca Print pad cleaning device.

This machine is as new and has only done around 100 print cycles.

It was purchased in 1999 at a cost of approx £17,000

The current set up is for thick (10 mm) steel plates but will also take thin steel and nylo plates.


SPECIFICATION:

Ink pots: 90 mm ø
Max print size: 72 mm ø
No. colours: 2
Plate size: 250 x 220 mm

Weight: Approx 82 kg
Dimensions: W 390 mm x H 724 mm x D 969 mm

New C80 PCB Teca Print circuit board serial no. 800060

Suitable for TC 60, TC 70, TC 80 and TC 250

Our price Includes insured delivery to mainland UK

New from Teca Print these retail at £295.45+VAT

Inking System: Sealed cup
Plate Size: 150 mm x 70 mm
Cup Size is: 65 mm diameter
Approx YOM: 1998
General Condition: Excellent
Any Known Problems: No
Can Be Seen Running: Yes

This is a refurbished bench mounted machine.

Stand (not Teca Print) available for £650.00

2 Available

This machine is brand New – Still on shipping pallet!! YOM 2002

Ideal machine for start up business.

SPECIFICATION:
Bench mounted
Closed ink cups: 90 mm ø
Max print size: 53 mm ø
2 colour set up
Magnetic plate holder for Nylo plates: 200 x 200 mm
Linear Transfer Suttle (LTS) table

This Teca-Print TC 500 Pad Printer with Transfer Carre, both are mounted on an original Teca-Print VR1 (XYZ) height adjustable table.

The TC 500 printer is an open ink well system and has a 500 x 150 mm plate holder. It will be supplied with a combination (magnetic) plate holder, a 500 mm flexi blade holder and the appropriate spatula combination.

The transfer carre has 14 stations with a pitch of 114.3 mm. The size of the platens is 113 x 108 mm. The transfer carre can be operated in automatic cycle or foot pedal adjustment, with a switch for 2, 3, 4 colours.

Both the printer and transfer carre are pneumatically operated and require single phase power.

Demonstration available on request.

Refurbished linear conveyor with 26 stations @ 114.3 mm pitch.

The machine is mounted on a VR1 adjustable table complete with 30 station electric linear conveyor @152 mm pitch, presently set up to print 2 colours. This includes 2 combination nylo plate holders mounted on an XY adjustable base.

The system has a spare position for an additional machine. The conveyor is fully programmable. The platens are 150 x 120 mm.

The price includes refurbishment of the machine (but does not include the second machine or tooling). A second machine could be located if required.

MINT CONDITION!

Ideal machine for start up business.

The machine was purchased in 2001 and has not been used other than producing a few samples.

Instruction Manual included.

VIEWING AVAILABLE WITH REASONABLE NOTICE.

SPECIFICATIONS

> Mounted on a height adjustable stand
> Closed ink cups
> 2 colour set up
> LTS 2 colour shuttle table

Series Line: 90/90x2
Printing Plate Format (mm): TBA
Ink Cup (Ø mm): 90
Useful Printing Width (mm): 53x53
Output (cycles/hr)***: 1400 max
Air consumption (NL/min)*: 210
Pad Pressure (N)**: 1870
Pad Stroke (mm): 200
Time Between Cycles (sec): 3 continuous
0 & 6 fixed

*** - depending on product and print image
** - at 6 bar
* - at 6 bar and max

This would be an ideal start up machine for anyone looking to go into subcontract printing. It can be used for single or multi colour printing.

This is a four colour machine with a pneumatic jig shuttle. The machine and shuttle are mounted on a height adjustable stand.

The machine is in good working order.


The machine comes with a complete set of accessories:

1 x four colour open ink tray
4 x pad carriers
4 x pad holders (plus 1 spare)
4 x doctor blade holders
4 x spatula

Also included is an exposure unit for making photopolymer (nylo) plates. The exposure window measures 475 x 350 mm approx.

This is a cracking little printer and is in very good condition.

It is open ink well and has a plate size of 100 x 80 mm.

The machine is mounted on a stand and it also comes with a two colour mini rotating jig as well as a basic XY table.

Click here for video clip (2mb)

4 COLOUR PAD PRINTER IN MINT CONDITION – GRAB YOURSELF A BARGAIN

This machine has hardly been used. Purchased new in 1999 at a cost of £100,000 it was almost immediately moth balled. The machine was then used in production for a year or so but has been mothballed for the last 10 months.

It is in mint condition and excellent working order.

This is a single colour sealed ink cup pad printer, with a plate size of 70 x 140 mm and is mounted on a stand.

It is tatty looking but has one of the smoothest actions I have ever seen on a Pad printer.

It can also be speeded up to 3600 prints per hour if you have automation.

Age is unknown.

This Teca-Print TC 500 Pad Printer and is being offered as a bench mounted model.

The TC 500 printer is an open ink well system and has a 500 x 150 mm plate holder.

The machine has been fully refurbished.

Included are:

1 x Teca-Print TC500 pad printer
1 x 500 mm flexi blade holder and 3 knurled retaining nuts
1 x 500 mm ink trough
1 x 500 mm spatula
1 x 500 mm front spacer bar
1 x 500 mm jacking bar
1 x dovetail slide, cone and nut
1 x foot pedal

Delivery: 3 weeks from receipt of deposit.

This would be an ideal start up.

It is currently set up for single colour printing.

The machine is mounted on a height adjustable stand with an XY table to enable easy positioning of the jig.

The machine is in good working order.

Foot pedal operation
Single phase power
Requires compressed air

The machine comes with two sets of plate holders:

420 x 150 mm
220 x 150 mm

The machine comes with a complete set of accessories:

1 x pad carrier
1 x pad holder
1 x doctor blade holder
1 x ink spatula

This would be an ideal start up machine and it is currently set up for single colour printing.

The machine is mounted on a height adjustable stand.

The machine is in good working order.

Plate size: 225 x 100 mm
Print area: 200 x 75 mm

Foot pedal operation
Single phase power
Requires compressed air

The machine comes with a selection of used pads.

STANDARD FEATURES
Microprocessor controls
Soft touch control panels
Precision cast aluminium structure
Anti vibration system
Adjustable doctor blade speed
Multi-functional program memory

You can see video clips of this model running using the 'Click for more Information' link to the left.

This Morlock pad printer can print up to 5 colours.

The machine is in good working order.

Plate Size: 90 x 165 mm
Print Size: 55 mm diameter
Pad Displacement: 80 mm
Pad Height Adjustment: 50 mm
Compressive force, max: 1000 N (100 kp)
Printing output, max: 800 cycles/hour, four-colour,
infinitely adjustable
Control: Electro-mechanical
Mains Connection: SIEMENS S7 PLC Controller
Control Voltage: 230 V 50/60 Hz 24V
Power Consumption: Approx. 800W
Weight: Approx 560 kg
Dimensions: W1100 x B800 x H1750 mm

The machine comes with a complete set of accessories:

5 x ceramic cups
5 x pad carriers
5 x pad holders

Selection of used pads

This is a two colour Teca Print TPU 251 with a pad shuttle and XY table. It has an automatic pad cleaning device.

The machine is in mint condition and comes as a two colour setup with a maximum print diameter of 82 mm. The ink pots have ceramic rings. The machine can take steel and nylon plates. Plate size is 250 x 220 mm.

The machine was purchased in 2004 and cost around £13,000. The machine counter shows it has only printed 3921.

We have manufactured a table for it which is included in the sale.